1: PAC composite filter 2 in 1

1.retains sediment, sand, silt, rust, impurities. Its innovative fiber and pleated structure enable it to contain a high filtering surface area, in a small space. In this way, the filter is highly effective and performs over time

2. the activated carbon "block" absorbs residual chlorine, odors and tastes. The structure consists of microgranules of activated charcoal, compacted and pressed. The filter in this way contains a high amount of filter mass, compared with traditional activated carbon, optimizing space and performance.

★ sopralavello

★ easy to transport

★ single connection to the electrical outlet

★ microfiltration + reverse osmosis + remineralization

★ quick-connect filters that are easy to replace

★ filter exhaustion warning

★ room temperature and hot water

★ instant water heating

WATER0 primordial water

4 stages of water purification

★ double pre-filtration with 2-in-1 composite filter

★ reverse osmosis membrane with 0.0001 micron porosity

★ natural remineralization filter

room temperature and hot water

★ 6 different temperatures for each use

★ instantaneous heating in 3 seconds, without boiler

★ molded hydraulic circuit

★ functional touch display

revolutionizes the way you drink

with WATER0 you always and immediately have quality water for every kind of hot drink :

tea, herbal tea, instant coffee, dissolved honey, milk powder for babies, etc.

pure water in 6 temperatures VS high installation/maintenance costs + stagnant water and high energy consumption + wait for heating

pure water, slightly alkaline, with the right residual minerals

1: PAC 2-in-1 composite filter

1.retains sediment, sand, silt, rust, impurities. Its innovative fiber and pleated structure enable it to contain a high filter surface area, in a small space. In this way, the filter is highly effective and performs over time

2. the activated carbon "block" absorbs residual chlorine, odors and tastes. The structure consists of microgranules of activated charcoal, compacted and pressed. The filter in this way contains a high amount of filter mass, compared with traditional activated carbon, optimizing space and performance.

2: Reverse osmosis membrane

It uses a more advanced technology than traditional reverse osmosis. This physical principle, is based on the separation of foreign substances from water by means of a semi-permeable membrane. It is a natural process that removes contaminants of chemical, organic, radioactive, bacteriological nature and reduces the fixed residue. A part of water with the substances that have not passed through the membrane is conveyed to the compartment of the tank, intended for discharge, while the water that has passed through the membrane is channeled to the final remineralizing filter (3).

The pores of the membrane are 0.0001 micron (thousandth of a millimeter), thus smaller than any contaminant or foreign substance.

3: remineralizing cartridge

perfectly purified water, free of unwanted substances, flows through a bed of minerals, just as it does in nature. Minerals are absorbed into the water by dissolution and ion exchange, the process occurs naturally, simply flowing through. Water passed by minerals is enriched in a balanced way with calcium, magnesium, and potassium, with a broad spectrum of trace elements. Only pure minerals, without chemical treatment and contamination.

hot water in just 3 seconds

end of "waiting" for hot water, thanks to the new technology of WATER0, in just 3 seconds hot water is available up to 99°C. This technology heats the water instantly and thanks to an electronic sensor allows you to select the most suitable temperature for various uses, without unnecessary waste of energy during the period of non-use and special maintenance charges.

the right temperature for every drink

selects the most suitable temperature for each use:

DRINK room temperature

Infantmilk powder 38°- 43°c

HONEY 52°- 57°C

TEA/TEA 75°- 80°C

COFFEE/ BARLEY 87°- 92°C

WATER FOR DISINFECTING 93°- 99°C

lowest ratio of produced/rejected water 2:1

the water discarded by the osmotic membrane is the lowest among the devices on the market (2 liters of produced water and 1 of discarded water) and is conveyed to a separate part of the tank, without coming into contact with the water still to be purified. This expedient makes it possible to obtain an even higher quality of purified water and a longer life of the filter units over time.

The tray is divided into :

raw water to be treated 3 liters

waste water 1 liter

exhausted filter alarm

don't rely on chance, WATER0 alerts you when each filter needs to be replaced

quick filter change

as with installation, maintenance does not require a technician. WATER0 alerts you which filter needs to be replaced, and through the simple rotation of the filter cartridge, you unhook and replace the exhausted filter with the new one, in seconds, without the need for tools.

molded hydraulic circuit

the main cause of leaks in water purifiers, is the numerous fittings and joints present. The hydraulic circuit of WATER0 is fully printed, thus minimizing the risk of leaks, error by technicians during interventions, optimizing hygienic safety.

• Tank capacity 3 liters
• Discharge water capacity 1 liter
• Produced/discharged water ratio 2:1
• Voltage 220V 50 Hz.
• Maximum power consumption 2100 W
• Inlet water temperature 4° - 38°C
• Water to be used potable water
• Appliance weight 7.3 kg.
• Dimensions 450 x 200 x 387 mm H

contact our customer service to get quotes and more information :

landline 0331464982 mobile network 3938036554 call or WhatsApp